Simplest Car Coating Process

Simplest Process to Installing TEVO Quartz Coating "Standard Level"

(only for new cars, polished cars or good conditions cars)

Car detailing be extremely expensive because of time consuming, professional skill, special equipment and the last but no least, the patience. Car detailer charges at high prices and almost differ among each other with various of reasons. It is hard to judge who has the best detailing skill out there. Let us assume if you are not professional car detailer but you are detailing your car with TEVO coating, we can guarantee that the application process and outcome will be much better than what you have anticipated. In this blog, you are able to find out how easy it is!

Environment for the coating process

• Before proceeding to the installation, you are advised to prepare an environment which is suitable for the application if you are seeking for optimum performance.

•  Indoor environment with no air circulation and room temperature of 25 Celsius is highly recommended.

• Avoid from direct sunlight, hazy, and dusty area.

•  Full angle lighting system and a portable spotlight is strongly recommended.

Tools and preparations

Products: 

• Bubble Max Shampoo(BMS), 
• Body Scrub(BS), 
• BodyGard-S36(S36)

Tools: 

• Clay Cloth, 
• 2 x Water sprayers, 
• 2 x Car Washing Sponge, 
• 4 x Microfiber Cloth(MC), 
• 2 x Coating Sponge, 
• 2 x Pail.

Inspections on the surfaces (For professional:Optional)

-Standard package only apply on good conditions car, brand new car, newly repainted car, and polished car.
-Inspect the surface if it has any swirl mark, dent, faded, scratch, watermark or any damages.
-Brief the car owner on the paint condition and let the him/her understand the expectation of the result.

Step 1: Surface preparations

Wash the car with Bubble Max Shampoo by using fine sponge

Proceed with claying process by using clay cloth while the surface is wet

Use a damp Microfiber Cloth to wipe off the shampoo

Step 2: Remover with BodyScrub

TEVO BodyScrub is an effective cleaning agent for car body which works like clay cloth. Grease, stain, and iron particle which is deeply adhered to the clear coat can be easily remove by using it. BodyScrub is best before the application of coating.  

You will be able to notice purple dots start to appear on the car body. This is happening because TEVO BodyScrub begins to dissolve the iron and dirt particle which already adhered into your clear coat. A smoother and cleaner surface will be ready after the cleaning process. Therefore, it shall lead to better bonding between the surface and coating.

Use coating sponge to apply BodyScrub on the painted surface before the surface dries up

After 1 minute, (before BodyScrub dries up) wipe off the BodyScrub with a damp Microfiber Cloth again. Lastlty, use a dry Microfiber Cloth to wipe the surface.

Step 3: Install BodyGard S36

TEVO Coating is so well known because of the easy application, excellent durability (up to 3 years) and high gloss. Apart from that, it can be applied by any car lover regardless of how skilful they are. TEVO BodyGard S36 is a perfect fit for amateur and professional applicator since the application is extremely easy.

Pour Body Gard S36 onto the coating sponge

Apply on the painted surface horizontally and then vertically.

Coat from one panel to another panel. Suggested sequence is front bonnet, roof top, rear bonnet and then side panels.

The buffing

Buff by panel with microfiber cloth 

After 20 minutes, follow the sequence of coated panel and start to buff it with no pressure at all. Car owner is advised to buff the 1st panel by the time they finished coating the third panel and so on.

*Please do take note the longer the waiting time before buffing time is, the better the performance of coated surface.

Your car will look great, and your wallet will thank you. 😊

Automobile inspections

• Standard package only apply on good conditions car, brand new car, newly repainted car, and    polished car.
• Inspect the surface if it has any swirl mark, dent, faded, scratch, watermark or any damages.
• Brief the car owner on the paint condition and let the him/her understand the expectation of the result. Best to snap photos of before and after to make comparison.

Curing Advice

• Keep automobile indoor, avoid touching or water contact for 24 hours
• Advise owner direct drives back the car and park it under the shelter to prevent water/rain contact &  for 24 Hours
• Do not wash the car within 5 days.

Maintenance Advice

• Hand wash only with reputable automobile detergent.
• Wash the coated car once in a week if possible.
• Touch up the coating every 6 to 12 months.